Materials Science and Engineering
- Inicio
- Engineering and Science
- Materials Science and Engineering
- Inicio
Director
Prof. Paula Alvaredo Olmos
Materials Science and Engineering and Chemical Engineering Department
About the program
The objective of this Ph.D. program is to train researchers in the field of Materials Science and Engineering, and enable them to gain experience in techniques of synthesis and/or processing of materials, as well as different material characterization techniques. It is considered essential to develop the capability to establish links between structure-microstructure and material properties, as well as their relationship to synthesis or processing techniques.Students will achieve a systematic understanding of some aspects of Materials Science and Engineering and a mastery of research skills and methods associated with that field of knowledge, e.g.:
- The ability to conceive, design, implement and adopt a substantial research process with scholarly integrity
- The ability to complete an original scientific or technological contribution, which stems from their research and expands the frontiers of knowledge in the field of Materials Science and Engineering. Ph.D. students are required to have made a scientific or technological contribution in a journal that is contained in the ISI, in order to be allowed to defend their Ph.D. thesis
- The ability to carry out a critical analysis, evaluation and synthesis of new and complex ideas
- The ability to communicate with peers, the academic community as a whole and with society at large about their areas of expertise
- Program regulated by RD 99/2011, January 28
Institute
Alvaro Alonso Barba Technological Institute of Chemistry and Materials
The goal of the Ph.D. Program in Materials Science and Engineering is to provide students with a technological and research training that enables them to develop their competencies in Universities, research departments of public or private enterprises or technological centers.
- ACCESS
Admission requirements
According to art. 6 of the PhD studies regulation (RD 99/2011), in order to access the Program it is required to have a Bachelor's degree (or equivalent) and a Master's degree (or equivalent), provided that at least 300 ECTS credits have been passed in these two cycles as a whole, or the equivalent degree qualifies for level 3 of MECES (Marco Español de Cualificaciones para la Educación Superior, Spanish Framework for Higher Education Qualifications).
Likewise, access is available to candidates in possession of foreign degrees from countries integrated into the European Higher Education Area (EHEA) when the degree can be accredited as level 7 in the European Qualifications Framework (EQF), as long as the aforementioned degree allows access to PhD level studies in the country of expedition; and candidates with a degree which is equivalent to a Spanish Master's degree, obtained in foreign education systems outside the EHEA, as long as the aforementioned degree allows access to PhD level studies in the country of expedition.
The Master's degree must be in the fields of materials science and technology, industrial production, civil engineering and engineering for society, chemistry science and technology, or physics with a specialization in materials or related fields.
Candidates with academic backgrounds in other fields (Mathematics, Energy and Transportation, Environmental Science and Technology, Bioscience and Biotechnology, etc.) may also be exceptionally admitted, provided that they meet the requirements of the current legislation to access Ph.D. studies. In this case, the Academic Committee will determine the complementary training of the candidate with subjects of UC3M's Master in Materials Science and Engineering which may require the completion of up to 30 ECTS of complementary training.
Admission criteria
Admission is decided according to the criteria set by the Academic Committee as listed below. These are implemented by the Coordinator of the program, who reports to the Committee on a regular basis.
- Academic background of the candidate (30%)
- Suitability of the candidate's profile to the lines of research of the Ph.D. Program (30%). Subjects and specialization as well as scientific works by the candidate will be taken into account.
- Viability of thesis proposal with details on the candidate's interest in the Ph.D. Program, line(s) of research to be carried out, contribution and innovative character (30%)
- Candidate's research interests, motivation and commitment to the Ph.D. Program. Candidates may provide one or more letters of recommendation from researchers from Universities or Research Centers with knowledge of the candidate's abilities and competence (10%)
- English skills will be taken into consideration (proof of minimum level B2 required)
- Candidates may have endorsement from a Professor from the Ph.D. Program.
Admission criteria and procedures are the same for full-time and part-time candidates.
Seats available for the academic year: 15
- FACULTY
- Academic Committee
Prof. Paula Alvaredo Olmos
Dpt. of Materials Science and Eng. and Chemical Eng. Director of the ProgramProf. Verónica San Miguel Arnanz
Dpt. of Materials Science and Eng. and Chemical Eng.Prof. Manuel Torres Carrasco
Dpt. of Materials Science and Eng. and Chemical Eng.
- Faculty
Synthesis and characterization of materials
- Abenójar Buendía, Juana
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Baselga Llido, Juan
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Bautista Arija, María Asunción
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Cabanelas Valcárcel, Juan Carlos
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - García Peñas, Alberto
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - González Benito, Francisco Javier
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Martín Cádiz, Olga
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Martínez Casanova, Miguel Ángel
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Olmos Díaz, Dania
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Pozuelo de Diego, Javier
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - San Miguel Arnanz, Verónica
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Serrano Prieto, María Bernarda
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Torres Carrasco, Manuel
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Velasco López, Francisco Javier
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid
Powder technology
- Alvaredo Olmos, Paula
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Campos Gómez, Mónica
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Cornide Arce, Juan
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Gordo Odériz, Elena
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Jiménez Morales, Antonia
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Rabanal Jiménez, María Eugenia
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Ruiz Navas, Elisa María
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Torralba Castello, José Manuel
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Tsipas, Sophia Alexandra
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid
Synthesis and processing
- Levenfeld Laredo, Belén
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Martínez Cisneros, Cynthia Susana
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Pérez Prior, María Teresa
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Sánchez, Jean Yves
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - Várez Álvarez, Alejandro
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid
Physics and mathematics
- Christensen, Johan
Department of Physics
Universidad Carlos III de Madrid - Leguey Galán, Teresa
Department of Physics
Universidad Carlos III de Madrid - López Bonilla, Luis Francisco
Dpt. of Materials Science and Eng. and Chemical Eng.
Universidad Carlos III de Madrid - López Martínez, Fernando
Department of Physics
Universidad Carlos III de Madrid - Meléndez Sánchez, Juan
Department of Physics
Universidad Carlos III de Madrid - Monge Alcázar, Miguel Ángel
Department of Physics
Universidad Carlos III de Madrid - Muñoz Castellanos, Ángel
Department of Physics
Universidad Carlos III de Madrid - Muñoz Santiuste, Juan Enrique
Department of Physics
Universidad Carlos III de Madrid - Savoini Cardiel, Begoña
Department of Physics
Universidad Carlos III de Madrid - Tardío López, Miguel Modesto
Department of Physics
Universidad Carlos III de Madrid
- Abenójar Buendía, Juana
- Academic Committee
- TRAINING
In addition to the elaboration of the doctoral thesis, students must take some training aimed at improving their research skills and the scientific quality of their research work. This is structured in the following types of training.
Specific training
- Predoctoral seminar of presentation of state-of-the-art research in development. Ph.D. candidates will participate with the presentation of a document authored by themselves. This is a mandatory activity to be carried out 12-18 months from initial enrollment and scheduled at the beginning of each academic year, with a maximum of two sessiones per year.
- Predoctoral seminar of presentation of final research outcomes by the Ph.D. candidate. This is a mandatory activity to be carried out in the final stage of the doctoral research. Completion of the seminar will enable the candidate to initiate the thesis defense process.
- Conferences or presentations by the Ph.D. candidate before a qualified audience in events hosted by external institutions to the Ph.D. Program.
- Conference series of the Ph.D. Program in Materials Science and Engineering. Minimum attendance to two conferences is required for every academic year. Ph.D. candidates will choose these conferences according to their research interests.
- Scientific publication. As part of their training, candidates are required to do at least one article for publication in a JCR-indexed journal (Journal of Citation Reports). The article must have the Ph.D. candidate listed as first or second author and be directly related to the research work of the doctoral thesis. This activity is mandatory in order to initiate the thesis defense process.
Research skills training
Research skills training is focused on abilities common to all disciplines for the development of scientific and educational skills and the improvement of the professional career. This training consists of different activities (short courses, seminars, etc.), which can be recommended by the Academic Committee of the program.
Students are required to take 2 credits (20 hours approximately) throughout the doctoral training period.
Further information:
- RESEARCH
- Research Lines
- Construction materials, corrosion and durability. Development of new materials for concrete and corrosion control
- Surface treatments and adhesion: adhesives and paints
- Electrochemical characterization of materials
- Composite and multifunctional materials: processing; properties; interphases; multifunctional composites; nanocomposites and polymer blends (thermoplastics and thermosets)
- Materials with electrical, magnetic, optical or thermal functionality. Manufacture of functional materials, study of the relationship between structure (at any length scale) and properties
- Nanomaterials and Nanotechnology. Synthesis and properties of new nanostructured and functional materials and their transformation processes applied to different industrial and scientific fields
- Materials with biomedical applications. Synthesis of biocompatible materials and fabrications of devices for biomedical applications
- Ceramic materials. Synthesis and characterization
- Materials for energy. Development of materials for energy conversion and storage systems
- Powder injection molding (PIM): Metal and ceramic materials
- Metallic Materials and Powder Metallurgy. Sintered titanium alloys and Ti matrix composites; Sintered Al alloys and Al matrix composites; Nickel base alloys; Sintered Mg alloys. Sintered low alloy steels; Stainless steels; Sintered tool steels
- Metallic materials for high temperature. Superalloys, ODS Steels, high entropy alloys, MAX phases, TiAl, cermets & HM
- Special production techniques. Spray-pyrolysis. Atomization. Mechanical grinding. Coatings by sol-gel. Surface treatments by diffusion. Additive manufacturing
- Scientific results
This is a sample of relevant publications derived from doctoral thesis work over the last five years:
- Thesis: Additive-free thick Li4Ti5O12 and LiFePO4 electrodes for high energy density lithium-ion batteries
Author: Carmen de la Torre Gamarra
Publications:
1. Additive-free Li4Ti5O12 thick electrodes for Li-ion batteries with high electrochemical performance Sotomayor, M.E., Torre-Gamarra, C.D.L., Bucheli, W., ...Levenfeld, B., Sanchez, J.-Y. Journal of Materials Chemistry A, 2018, 6(14), pp. 5952–5961
2. Na3Si2Y0.16Zr1.84PO12-ionic liquid hybrid electrolytes: An approach for realizing solid-state sodium-ion batteries? de la Torre-Gamarra, C., Appetecchi, G.B., Ulissi, U., ...Varez, A., Passerini, S. Journal of Power Sources, 2018, 383, pp. 157–163
3. Spectroscopy and Judd-Ofelt analysis of Er3+ ions in Li5La3Nb2O12 garnet-type ceramic powder Egaña, A., Tardío, M., de la Torre-Gamarra, C., ...Cantelar, E., Muñoz Santiuste, J.E. Journal of Luminescence, 2018, 202, pp. 232–238
4. Structural, morphology and luminescence study of Er+3-doped garnet-type Li5La3Nb2O12 electrolytes as a potential new phosphor Egaña, A., de la Torre Gamarra, C., Tardío, M., Várez, A., Muñoz-Santiuste, J.E. Ceramics International, 2018, 44(15), pp. 18969–18977
5. Ultra-thick battery electrodes for high gravimetric and volumetric energy density Li-ion batteries Sotomayor, M.E., Torre-Gamarra, C.D.L., Levenfeld, B., ...Varzi, A., Passerini, S. Journal of Power Sources, 2019, 437, 226923
6. High mass loading additive-free LiFePO4 cathodes with 500 μm thickness for high areal capacity Li-ion batteries de la Torre-Gamarra, C., Sotomayor, M.E., Sanchez, J.-Y., ...Laïk, B., Pereira-Ramos, J.-P. Journal of Power Sources, 2020, 458, 228033
7. Tape casting manufacturing of thick Li4Ti5O12 ceramic electrodes with high areal capacity for lithium-ion batteries de la Torre-Gamarra, C., Sotomayor, M., Bucheli, W., ...Levenfeld, B., Varez, A. Journal of the European Ceramic Society, 2021, 41(1), pp. 1025–1032
8. Sulfonated polysulfone/tio2(B) nanowires composite membranes as polymer electrolytes in fuel cells Martinez-Morlanes, M.J., De La Torre-Gamarra, C., Pérez-Prior, M.T., ...Várez, A., Levenfeld, B. Polymers, 2021, 13(12), 2030
9. Layer Shape LiFePO4 Obtained by Powder Extrusion Molding as Solid Boosters for Ferro/Ferricyanide Catholyte in Semisolid Redox Flow Battery: Effect of Porosity and Shape Vivo-Vilches, J.F., Vázquez-Navalmoral, Á., de la Torre-Gamarra, C., ...Várez, A., Levenfeld, B. Batteries and Supercaps, 2022, 5(7), e202200050
Quality indicators:
Journal of Materials Chemistry A 11,9 MATERIALS SCIENCE, MULTIDISCIPLINARY 32/342 Q1
Journal of Power Sources 9,2 ENERGY & FUELS 21/115 Q1
Journal of Luminescence 3,6 OPTICS 31/100 Q2
Ceramics International IF: 5,2 MATERIALS SCIENCE, CERAMICS Q1
Journal of the European Ceramic Society IF: 5,7 MATERIALS SCIENCE, CERAMICS Q1
Polymers 5,0 POLYMER SCIENCE 16/86 Q1 - Thesis: Preparación y caracterización de nuevos materiales nanocompuestos termoplásticos
Author: Jorge Teno Díaz
Publications:
1. PVDF/TiO2 nanocomposites prepared by solution blow spinning: Surface properties and their relation with S. Mutans adhesion
González-Benito, J., Teno, J., González-Gaitano, G., Xu, S., Chiang, M.Y.
Polymer Testing, 2017, 58, pp. 21–30
2. Poly (ethylene-co-vinyl acetate) films prepared by solution blow spinning: Surface characterization and its relation with E. coli adhesion
Teno, J., González-Gaitano, G., González-Benito, J.
Polymer Testing, 2017, 60, pp. 140–148
3. Nanofibrous polysulfone/TiO2 nanocomposites: Surface properties and their relation with E. coli adhesion
Teno, J., González-Gaitano, G., González-Benito, J.
Journal of Polymer Science, Part B: Polymer Physics, 2017, 55(21), pp. 1575–1584
4. Conformational changes on PMMA induced by the presence of TiO2 nanoparticles and the processing by Solution Blow Spinning
Iorio, M., Teno, J., Nicolás, M., ...González-Gaitano, G., González-Benito, J.
Colloid and Polymer Science, 2018, 296(3), pp. 461–469
5. Nanomorphology and nanomechanical characteristics of solution-blow-spun PVDF-based fibers filled with carbon nanotubes
González-Benito, J., Olmos, D., Teno, J., González-Gaitano, G.
Journal of Applied Polymer Science, 2019, 136(10), 47115
6. PVDF based nanocomposites produced by solution blow spinning, structure and morphology induced by the presence of MWCNT and their consequences on some properties
González-Benito, J., Torres, D., Ballesteros, C., Ruiz, V.M., Teno, J.
Colloid and Polymer Science, 2019, 297(7-8), pp. 1105–1118
7. Fibrous nanocomposites based on EVA40 filled with Cu nanoparticles and their potential antibacterial action
Teno, J., Corral, A., Gorrasi, G., Sorrentino, A., Benito, J.G.
Materials Today Communications, 2019, 20, 100581
Quality indicators:
Polymer Testing 5,1 POLYMER SCIENCE 14/86 Q1
JOURNAL OF Polymer Science 3,4 POLYMER SCIENCE 31/86 Q2
Colloid and Polymer Science 2,4 POLYMER SCIENCE 53/86 Q3
Journal of Applied Polymer Science 3,0 POLYMER SCIENCE 43/86 Q2
Materials Today CommunicationS 3,2 MATERIALS SCIENCE, MULTIDISCIPLINARY 152/342 Q2 - Thesis: Aplicación de la Tecnología de Adhesivos en Estructuras Multimaterial: Empleo de Adhesivos Tenaces
Author: Pedro Gálvez Villarino
Publications:
1. Study of the behaviour of adhesive joints of steel with CFRP for its application in bus structures
Galvez, P., Quesada, A., Martinez, M.A., ...Boada, M.J.L., Diaz, V.
Composites Part B: Engineering, 2017, 129, pp. 41–46
2. Durability of steel-CFRP structural adhesive joints with polyurethane adhesives
Galvez, P., Abenojar, J., Martinez, M.A.
Composites Part B: Engineering, 2019, 165, pp. 1–9
3. Effect of moisture and temperature on the thermal and mechanical properties of a ductile epoxy adhesive for use in steel structures reinforced with CFRP
Galvez, P., Abenojar, J., Martinez, M.A.
Composites Part B: Engineering, 2019, 176, 107194
4.Intensity of singular stress field (ISSF) variation as a function of the Young's modulus in single lap adhesive joints
Galvez, P., Noda, N.-A., Takaki, R., ...Abenojar, J., Martínez, M.A.
International Journal of Adhesion and Adhesives, 2019, 95, 102418
5. Effect of moisture and temperature on thermal and mechanical properties of structural polyurethane adhesive joints
Galvez, P., Lopez de Armentia, S., Abenojar, J., Martinez, M.A.
Composite Structures, 2020, 247, 112443
Quality indicators:
Composites Part B: Engineering 3,9 MATERIALS SCIENCE, COMPOSITES 2/28Q1
International Journal of Adhesion and Adhesives 3,4 MATERIALS SCIENCE, MULTIDISCIPLINARY 173/342 Q3
Composite Structures 6,3 MATERIALS SCIENCE, COMPOSITES 7/28 Q1 - Thesis: Processing and surface modification of β-Titanium alloys produced by powder metallurgy for biomedical application
Author: Caterina del Carmen Chirico Rodríguez
Publications:
1. Beta titanium alloys produced from titanium hydride: Effect of alloying elements on titanium hydride decomposition
Chirico, C., Tsipas, S.A., Wilczynski, P., Gordo, E.
Metals, 2020, 10(5), 682
2. Corrosion and Tribocorrosion Behavior of Ti-40Nb and Ti-25Nb-5Fe Alloys Processed by Powder Metallurgy
Çaha, I., Alves, A., Chirico, C., ...Gordo, E., Toptan, F.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020, 51(6), pp. 3256–3267
3. Interactions between wear and corrosion on cast and sintered Ti-12Nb alloy in comparison with the commercial Ti-6Al-4V alloy
Çaha, I., Alves, A.C., Chirico, C., ...Gordo, E., Toptan, F.
Corrosion Science, 2020, 176, 108925
4. Tribocorrosion-Resistant Ti40Nb-TiN Composites Having TiO2-Based Nanotubular Surfaces
Çaha, I., Alves, A.C., Chirico, C., ...Gordo, E., Toptan, F.
ACS Biomaterials Science and Engineering, 2021
5. A promising method to develop TiO2-based nanotubular surfaces on Ti-40Nb alloy with enhanced adhesion and improved tribocorrosion resistance
Çaha, I., Alves, A.C., Chirico, C., ...Gordo, E., Toptan, F.
Applied Surface Science, 2021, 542, 148658
6. Improved tribocorrosion behavior on bio-functionalized β-type titanium alloy by the pillar effect given by TiN reinforcements
Çaha, I., Alves, A.C., Chirico, C., ...Gordo, E., Toptan, F.
Surface and Coatings Technology, 2021, 415, 127122
7. Improvement of wear resistance of low-cost powder metallurgy β-titanium alloys for biomedical applications
Chirico, C., Romero, A.V., Gordo, E., Tsipas, S.A.
Surface and Coatings Technology, 2022, 434, 128207
8. Atomic–scale investigations of passive film formation on Ti-Nb alloys
Çaha, I., Alves, A.C., Chirico, C., ...Leonard Deepak, F., Toptan, F.
Applied Surface Science, 2023, 615, 156282
Quality indicators:
Metals: if: 2,9 METALLURGY & METALLURGICAL ENGINEERING 24/78 Q2
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2,8 METALLURGY & METALLURGICAL ENGINEERING 25/78 Q2
Corrosion Science IF: 8,3 METALLURGY & METALLURGICAL ENGINEERING 5/78 Q1
Applied Surface Science 6,7 MATERIALS SCIENCE, COATINGS & FILMS 1/21 Q1
Surface and Coatings Technology IF: 5,4
Materials Science - Surfaces, Coatings and Films 17/129 Q1 - Thesis: Durability of eco-friendly alternative materials to Portland cement
Author: Segundo Manuel Shagñay Pucha
Publications:
1. Wear behavior in pastes of alkali-activated materials: Influence of precursor and alkali solution
Shagñay, S., Velasco, F., del Campo, A., Torres-Carrasco, M.
Tribology International, 2020, 147, 106293
2. Eco-efficient hybrid cements: Pozzolanic, mechanical and abrasion properties
Shagñay, S., Ramón, L., Fernández-álvarez, M., ...Velasco, F., Torres-Carrasco, M.
Applied Sciences (Switzerland), 2020, 10(24), pp. 1–15, 8986
3. Hybrid cements: Towards their use as alternative and durable materials against wear
Shagñay, S., Bautista, A., Velasco, F., Torres-Carrasco, M.
Construction and Building Materials, 2021, 312, 125397
4. Chloride-induced corrosion of steel reinforcement in mortars manufactured with alternative environmentally-friendly binders
Shagñay, S., Bautista, A., Donaire, J., ...Bastidas, D.M., Velasco, F.
Cement and Concrete Composites, 2022, 130, 104557
5. Influence of the early-age length change of alkali-activated slag mortars on the corrosion of embedded steel
Shagñay, S., Bautista, A., Velasco, F., Ramón-Álvarez, I., Torres-Carrasco, M.
Journal of Sustainable Cement-Based Materials, 2023
6. Mineralogical and microstructural changes in alkali-activated and hybrid materials exposed to accelerated leaching
Shagñay, S., Garcia-Lodeiro, I., Velasco, F., Bautista, A., Torres-Carrasco, M.
Journal of Building Engineering, 2023, 64, 105733
7. Carbonation of alkali-activated and hybrid mortars manufactured from slag: Confocal Raman microscopy study and impact on wear performance | Carbonatación de morteros de escoria activados alcalinamente e híbridos: estudio mediante microscopía Raman Confocal y la repercusión en las prestaciones de desgaste
Shagñay, S., Bautista, A., Velasco, F., Torres-Carrasco, M.
Boletin de la Sociedad Espanola de Ceramica y Vidrio, 2023, 62(5), pp. 428–442
8. Licorice (Glycyrrhiza glabra) as corrosion inhibitor of carbon steel reinforcing bars in mortar and its synergic effect with nitrite
Naderi, R., Bautista, A., Shagñay, S., Velasco, F.
Journal of Industrial and Engineering Chemistry, 2024, 129, pp. 620–633
Quality indicators:
Tribology International 6,2 ENGINEERING, MECHANICAL 12/135 Q1
Applied Sciences 2,7 MATERIALS SCIENCE, MULTIDISCIPLINARY 207/342 Q3
Construction and Building Materials 7,4 MATERIALS SCIENCE, MULTIDISCIPLINARY 74/342 Q1
Journal of Sustainable Cement-Based Materials 4,4 MATERIALS SCIENCE, MULTIDISCIPLINARY 132/342 Q2
Journal of Building Engineering 6,4 CONSTRUCTION & BUILDING TECHNOLOGY 11/68 Q1
Boletin de la Sociedad Espanola de Ceramica y Vidrio IF: 3,4 MATERIALS SCIENCE, CERAMICS Q1
Journal of Industrial and Engineering Chemistry 6,1 ENGINEERING, CHEMICAL 23/140 Q1 - Thesis: Bioabsorbable composite laminates of PLA reinforced with surface-modified Mg wires for orthopedic implant applications
Author: Syed Wahaaj Ali Rizvi
Publications:
1. Strength, corrosion resistance and cellular response of interfaces in bioresorbable poly-lactic acid/Mg fiber composites for orthopedic applications
Ali, W., Echeverry-Rendón, M., Kopp, A., González, C., LLorca, J.
Journal of the Mechanical Behavior of Biomedical Materials, 2021, 123, 104781
2. Simulation of corrosion and mechanical degradation of additively manufactured Mg scaffolds in simulated body fluid
Marvi-Mashhadi, M., Ali, W., Li, M., González, C., LLorca, J.
Journal of the Mechanical Behavior of Biomedical Materials, 2022, 126, 104881
3. Bioabsorbable WE43 Mg alloy wires modified by continuous plasma-electrolytic oxidation for implant applications. Part I: Processing, microstructure and mechanical properties
Ali, W., Li, M., Tillmann, L., ...LLorca, J., Kopp, A.
Biomaterials Advances, 2023, 146, 213314
4. Bioabsorbable WE43 Mg alloy wires modified by continuous plasma electrolytic oxidation for implant applications. Part II: Degradation and biological performance
Ali, W., Echeverry-Rendón, M., Dominguez, G., ...González, C., LLorca, J.
Biomaterials Advances, 2023, 147, 213325
5. Phase-field modeling of pitting and mechanically-assisted corrosion of Mg alloys for biomedical applications
Kovacevic, S., Ali, W., Martínez-Pañeda, E., LLorca, J.
Acta Biomaterialia, 2023, 164, pp. 641–658
Quality indicators:
Journal of the Mechanical Behavior of Biomedical Materials 3,9 MATERIALS SCIENCE, BIOMATERIALS 27/45 Q3
Acta Biomaterialia 9,7 MATERIALS SCIENCE, BIOMATERIALS 5/45 Q1 - Thesis: Nano-architectures with hierarchical porosity manufactured by colloidal techniques for application in ceramic semiconductor-based supercapacitors
Author: Joaquín Luis Yus Domínguez
Publications:
1. Electrochemical performance of pseudo-capacitor electrodes fabricated by Electrophoretic Deposition inducing Ni(OH)2 nanoplatelets agglomeration by Layer-by-Layer
Gonzalez, Z., Yus, J., Caballero, A., ...Sanchez-Herencia, A.J., Ferrari, B.
Electrochimica Acta, 2017, 247, pp. 333–343
2. In situ synthesis and electrophoretic deposition of NiO/Ni core-shell nanoparticles and its application as pseudocapacitor
Yus, J., Ferrari, B., Sanchez-Herencia, A.J., ...Morales, J., Gonzalez, Z.
Coatings, 2017, 7(11), 193
3. A colloidal approach to prepare binder and crack-free TiO2 multilayer coatings from particulate suspensions: Application in DSSCs
Gonzalez, Z., Yus, J., Sanchez-Herencia, A.J., ...Henrist, C., Ferrari, B.
Journal of the European Ceramic Society, 2019, 39(2-3), pp. 366–375
4. Electrophoretic deposition of RGO-NiO core-shell nanostructures driven by heterocoagulation method with high electrochemical performance
Yus, J., Bravo, Y., Sanchez-Herencia, A.J., Ferrari, B., Gonzalez, Z.
Electrochimica Acta, 2019, 308, pp. 363–372
5. Semiconductor water-based inks: Miniaturized NiO pseudocapacitor electrodes by inkjet printing
Yus, J., Gonzalez, Z., Sanchez-Herencia, A.J., ...Morales, J., Ferrari, B.
Journal of the European Ceramic Society, 2019, 39(9), pp. 2908–2914
6. Understanding the effects of different microstructural contributions in the electrochemical response of Nickel-based semiconductor electrodes with 3D hierarchical networks shapes
Yus, J., Ferrari, B., Sanchez-Herencia, A.J., Gonzalez, Z.
Electrochimica Acta, 2020, 335, 135629
Quality indicators:
Electrochimica Acta 6,6 ELECTROCHEMISTRY Q2
Coatings 3,4 MATERIALS SCIENCE, COATINGS & FILMS 9/21 Q2
Journal of the European Ceramic Society IF: 5,7 MATERIALS SCIENCE, CERAMICS Q1 - Thesis: Development of new ferritic 14 Cr ODS steels with four oxides formers (Y, Ti, Zr, Al) for nuclear applications
Author: Eric Macía Rodríguez
Publications:
1.- Effect of the heating rate on the microstructure of a ferritic ODS steel with four oxide formers (Y-Ti-Al-Zr) consolidated by spark plasma sintering (SPS)
Macía, E., García-Junceda, A., Serrano, M., ...Diaz, L.A., Campos, M.
Journal of Nuclear Materials, 2019, 518, pp. 190–201
2.- Effect of small variations in Zr content on the microstructure and properties of ferritic ODS steels consolidated by SPS
García‐Junceda, A., Macía, E., Garbiec, D., ...Torralba, J.M., Campos, M.
Metals, 2020, 10(3), 348
3.- Development of new 14 Cr ODS steels by using new oxides formers and B as an inhibitor of the grain growth
Meza, A., Macía, E., García-Junceda, A., ...Rabanal, M.E., Campos, M.
Metals, 2020, 10(10), pp. 1–16, 1344
4.- Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y–Ti–Al–Zr) addition processed by Spark Plasma Sintering (SPS)
Macía, E., García-Junceda, A., Serrano, M., Hong, S.J., Campos, M.
Nuclear Engineering and Technology, 2021, 53(8), pp. 2582–2590
5.- The effect of composition and microstructure on the creep behaviour of 14 Cr ODS steels consolidated by SPS
Meza, A., Macía, E., Chekonin, P., ...Torralba, J.M., Campos, M.
Materials Science and Engineering: A, 2022, 849, 143441
Quality indicators:
Materials Science and Engineering A 6,4 MATERIALS SCIENCE, MULTIDISCIPLINARY 85/342 Q1
Journal of Nuclear Materials 3,1 MATERIALS SCIENCE, MULTIDISCIPLINARY 187/342 Q3
Nuclear Engineering and Technology 2,7 NUCLEAR SCIENCE & TECHNOLOGY 5/34 Q1
Metals: if: 2,9 METALLURGY & METALLURGICAL ENGINEERING 24/78 Q2 - Thesis: A novel antibacterial sol-gel coating for prosthetic devices
Author: Amaya García Casas
Publications:
1.- Scanning electrochemical microscopy characterization of sol-gel coatings applied on AA2024-T3 substrate for corrosion protection
Carbonell, D.J., García-Casas, A., Izquierdo, J., ...Galván, J.C., Jiménez-Morales, A.
Corrosion Science, 2016, 111, pp. 625–636
2.- Electrochemical study of the synergic effect of phosphorus and cerium additions on a sol-gel coating for Titanium manufactured by powder metallurgy
Alcantara-Garcia, A., Garcia-Casas, A., Jimenez-Morales, A.
Progress in Organic Coatings, 2018, 124, pp. 267–274
3.- Functionalization of sol-gel coatings with organophosphorus compounds for prosthetic devices
Garcia-Casas, A., Aguilera-Correa, J.J., Mediero, A., Esteban, J., Jimenez-Morales, A.
Colloids and Surfaces B: Biointerfaces, 2019, 181, pp. 973–980
4.- A New Antibiotic-Loaded Sol-Gel Can Prevent Bacterial Prosthetic Joint Infection: From in vitro Studies to an in vivo Model
Aguilera-Correa, J.J., Garcia-Casas, A., Mediero, A., ...Jiménez-Morales, A., Esteban, J.
Frontiers in Microbiology, 2020, 10, 2935
5.- The effect of the organosilane content on the barrier features of sol-gel anticorrosive coatings applied on carbon steel
Alcantara-Garcia, A., Garcia-Casas, A., Jimenez-Morales, A.
Progress in Organic Coatings, 2020, 139, 105418
6.- A new antibiotic-loaded sol-gel can prevent bacterial intravenous catheter-related infections
Aguilera-Correa, J.J., Vidal-Laso, R., Carias-Cálix, R.A., ...Jiménez-Morales, A., Esteban, J.
Materials, 2020, 13(13), 2946
7.- A biodegradable antifungal-loaded sol-gel coating for the prevention and local treatment of yeast prosthetic-joint infections
Romera, D., Toirac, B., Aguilera-Correa, J.-J., ...Jiménez-Morales, A., Esteban, J.
Materials, 2020, 13(14), 3144
8.- Electrochemical characterization of coatings for local prevention of Candida infections on titanium-based biomaterials
Toirac, B., Garcia-Casas, A., Cifuentes, S.C., ...Mediero, A., Jiménez-Morales, A.
Progress in Organic Coatings, 2020, 146, 105681
Quality indicators:
Corrosion Science IF: 8,3 METALLURGY & METALLURGICAL ENGINEERING 5/78 Q1
Progress in Organic Coatings IF: 6,6 MATERIALS SCIENCE, COATINGS & FILMS 2/21 Q1
Colloids and Surfaces B: Biointerfaces 5,4 MATERIALS SCIENCE, BIOMATERIALS Q2
Frontiers in Microbiology 6,2 CHEMISTRY, PHYSICAL Q2
Materials IF: 3,4
Metallurgy & Metallurgical Engineering Q2 - Thesis: Síntesis y caracterización de membranas poliméricas de intercambio protónico y aniónico para su aplicación como electrolitos sólidos en pilas de combustible.
Author: María de las Nieves Ureña Torres
Publications:
1. DABCO-functionalized polysulfones as anion-exchange membranes for fuel cell applications: Effect of crosslinking
Teresa Pérez-Prior, M., Ureña, N., Tannenberg, M., del Río, C., Levenfeld, B.
Journal of Polymer Science, Part B: Polymer Physics, 2017, 55(17), pp. 1326–1336
2. Multiblock copolymers of sulfonated PSU/PPSU Poly(ether sulfone)s as solid electrolytes for proton exchange membrane fuel cells
Ureña, N., Pérez-Prior, M.T., Río, C.D., ...Iojoiu, C., Levenfeld, B.
Electrochimica Acta, 2019, 302, pp. 428–440
3. On the conductivity of proton-exchange membranes based on multiblock copolymers of sulfonated polysulfone and polyphenylsulfone: An experimental and modeling study
Ureña, N., Pérez-Prior, M.T., Levenfeld, B., García-Salaberri, P.A.
Polymers, 2021, 13(3), pp. 1–24, 363
4. Synthesis and characterization of novel anion exchange membranes based on semi-interpenetrating networks of functionalized polysulfone: Effect of ionic crosslinking
Swaby, S., Ureña, N., Pérez-Prior, M.T., Várez, A., Levenfeld, B.
Polymers, 2021, 13(6), 958
5. New amphiphilic semi-interpenetrating networks based on polysulfone for anion-exchange membrane fuel cells with improved alkaline and mechanical stabilities
Ureña, N., Pérez-Prior, M.T., Rio, C.D., Várez, A., Levenfeld, B.
Polymer, 2021, 226, 123824
6. Ion-Exchanged UPG-1 as Potential Electrolyte for Fuel Cells
Salcedo-Abraira, P., Vilela, S.M.F., Ureña, N., ...Várez, A., Horcajada, P.
Inorganic Chemistry, 2021, 60(16), pp. 11803–11812
Quality indicators:
JOURNAL OF Polymer Science 3,4 POLYMER SCIENCE 31/86 Q2
Electrochimica Acta 6,6 ELECTROCHEMISTRY Q2
Polymers 5,0 POLYMER SCIENCE 16/86 Q1
- Thesis: Additive-free thick Li4Ti5O12 and LiFePO4 electrodes for high energy density lithium-ion batteries
- Scientific publications
This is a sample of relevant faculty publications:
- Monireh Moradienayat, Javier González-Benito, Dania Olmos "Airbrushed PSF/ZnO composite coatings as a novel approach for the consolidation of historical bones"; Nanomaterials v. 13 n. 4,625 (2023)
Impact factor: IF JCR: 4,034 IF SCOPUS: 0,839 - Irene Ramón-Álvarez, Carolina Marugán-Cruz, Esther Enríquez, Sergio Sánchez-Delgado, Manuel Torres-Carrasco "Alkali-activated and hybrid materials: Alternative to Portland cement as a storage media for solar thermal energy = Materiales activados alcalinamente e híbridos: alternativas al cemento Portland como medio de almacenamiento de energía térmica solar"; Boletín de la Sociedad Española de Cerámica y Vidrio v.62 n. 2 (2023)
Impact factor: IF JCR: 3,483 IF SCOPUS: 0,444 - Bidhan Pandit, Morten Johansen, Bettina P. Andersen, Cynthia S. Martínez-Cisneros, Belen Levenfeld, Dorthe B. Ravnsbæk, Alejandro Varez "All-solid-state sodium-ion batteries operating at room temperature based on NASICON-type NaTi2(PO4)3 cathode and ceramic NASICON solid electrolyte: A complete in situ synchrotron X-ray study"; Chemical Engineering Journal v. 472 n. 144509 (2023)
Impact factor: IF JCR: 16,744 IF SCOPUS: 2,419 - Xiomara Santos, Juana Rodríguez, Francisco Guillén, Javier Pozuelo, J. M. Molina-Guijarro, Diogo Videira-Quintela, Olga Martín "Capability of Copper Hydroxy Nitrate (Cu2(OH)3NO3) as an Additive to Develop Antibacterial Polymer Contact Surfaces: Potential for Food Packaging Applications"; Polymers v. 15 n. 7 (2023)
Impact factor: IF JCR: 2,935 IF SCOPUS: 0,726 - A. Garzon-Roman, A. Ferreiro, C. Zúñiga-Islas, M.E. Rabanal "Evaluation of synthesis time in the growth of vertical-aligned MWCNTs by spray pyrolysis"; Materials characterization v. 203 n. 113105 (2023)
Impact factor: IF JCR: 4,537 IF SCOPUS: 1,122 - M. de Nicolás-Morillas, L. Llanes, E. Gordo "High-temperature wettability in hard materials: Comparison of systems with different binder/carbide phases and evaluation of C addition"; International Journal of Refractory Metals & Hard Materials v. 111 n. 106081 (2023)
Impact factor: IF JCR: 4,804 IF SCOPUS: 1,037 - Paula Rodríguez-González, Miguel Ángel Monge, Elena Gordo, Elisa María Ruiz-Navas "Microstructural, chemical, and mechanical characterization of extruded Al-Cu-Li rods"; Materials Characterization v. 203 n. 113048 (2023)
Impact factor: IF JCR: 4,537 IF SCOPUS: 1,122 - S. Shagñay, I. Garcia-Lodeiro, F. Velasco, A. Bautista, M. Torres-Carrasco "Mineralogical and microstructural changes in alkali-activated and hybrid materials exposed to accelerated leaching"; Journal of Building Engineering v. 64 n. 105733 (2023)
Impact factor: IF JCR: 5,318 IF SCOPUS: 1,164 - Víctor M. Ruiz, Dania Olmos, Javier González-Benito "PVDF/MWCNT nanocomposites with complex configurations prepared by solution blow spinning and their flexoelectric responses"; Polymer v. 267 n. 125669 (2023)
Impact factor: IF JCR: 4,432 IF SCOPUS: 0,774 - José Antonio Butenegro, Mohsen Bahrami, Miguel Ángel Martínez, Juana Abenojar "Reuse of Carbon Fibers and a Mechanically Recycled CFRP as Rod-like Fillers for New Composites: Optimization and Process Development"; Processes v. 11 n. 2,366 (2023)
Impact factor: IF JCR: 1,963 IF SCOPUS: 0,474 - Marcos Álvarez, Juan Baselga, Javier Pozuelo "Tuning the electromagnetic shielding mechanism with nitrogen-doped graphene aerogels"; ChemNanoMat v. 9 n. 1, e202200451 (2023)
Impact factor: IF JCR: 3,82 IF SCOPUS: 0,823 - Ivan Gorban, Nieves Ureña, María Teresa Pérez-Prior, Alejandro Várez, Belén Levenfeld, Carmen del Río, Mikhail Soldatov "Using Metal-Organic Framework HKUST-1 for the Preparation of High-Conductive Hybrid Membranes Based on Multiblock Copolymers for Fuel Cells"; Polymers v. 15 n. 2, 323 (2023)
Impact factor: IF JCR: 2,935 IF SCOPUS: 0,726 - Ana Kramar, Franciso Javier González-Benito "Cellulose-Based Nanofibers Processing Techniques and Methods Based on Bottom-Up Approach-A Review"; Polymers v. 14 n. 2 (2022)
Impact factor: IF JCR: 2,935 IF SCOPUS: 0,726 - A. Rodriguez-Lopez, B. Savoini, M.A Monge, A. Muñoz "Characterization and evaluation of CuCrFeV(Ti, Ta, W) system for High Heat Flux applications"; Nuclear Materials and Energy v. 31 n. 101187
Impact factor: IF JCR: IF SCOPUS: 1,033 - Akshya K. Pandey, Paula Alvaredo, Srdjan Milenkovic, Federico Sket "Development of powders of Ti-Fe-Sn ultrafine eutectics for laser additive manufacturing"; Powder Technology v. 404 n. 117416 (2022)
Impact factor: IF JCR: 5,64 IF SCOPUS: 0,999 - M. Bahrami, D. Lavayen-Farfan, M.A. Martínez, J. Abenojar "Experimental and numerical studies of polyamide 11 and 12 surfaces modified by atmospheric pressure plasma treatment"; Surfaces and Interfaces v. 32 n. 102154 (2022)
Impact factor: IF JCR: 6,137 IF SCOPUS: 0,742 - Eduardo Tabares, Michael Kitzmantel, Erich Neubauer, Antonia Jimenez-Morales, Sophia A. Tsipas "Extrusion-based additive manufacturing of Ti3SiC2 and Cr2AlC MAX phases as candidates for high temperature heat exchangers"; Journal of the European Ceramic Society v. 42 n. 3 (2022)
Impact factor: IF JCR: 6,364 IF SCOPUS: 1,107 - C. Chirico, A.Vaz Romero, E. Gordo, S.A. Tsipas "Improvement of wear resistance of low-cost powder metallurgy beta-titanium alloys for biomedical applications"; Surface and Coatings Technology v. 434 n. 128207 (2022)
Impact factor: IF JCR: 4,865 IF SCOPUS: 0,922 - Raquel Giménez, Berna Serrano, Verónica San-Miguel, Juan Carlos Cabanelas "Recent Advances in MXene/Epoxy Composites: Trends and Prospects"; Polymers v. 14 n. 6 (2022)
Impacto: IF JCR: 2,935 IF SCOPUS: 0,726 - A. Meza, E. Macía, P. Chekhonin, E. Altstadt, M.E. Rabanal, J.M. Torralba, M. Campos "The effect of composition and microstructure on the creep behaviour of 14 Cr ODS steels consolidated by SPS"; Materials Sciences and Engineering A-Strictural Materials Properties Microstructure and Processing v. 849 n. 143441 (2022)
Impact factor: IF JCR: 6,044 IF SCOPUS: 1,563 - Eduardo Reverte, Monique Calvo-Dahlborg, Ulf Dahlborg, Monica Campos, Paula Alvaredo, Pablo Martin-Rodriguez, Elena Gordo, Juan Cornide "Design and production of a new feconicralcu high-entropy alloy: Influence of powder production method on sintering"; Materials - MDPI v. 14 n. 15 (2021)
Impact factor: IF JCR: 2,972 IF SCOPUS: 0,604 - Mónica Campos, José M. Torralba, Raquel de Oro, Elena Bernardo, Andrea Galán-Salazar "New Opportunities for Low Alloy Steels-Master Alloys for Liquid Phase Sintering"; Metals v. 11 n. 1 (2021)
Impact factor: IF JCR: 2,259 IF SCOPUS: 0,569 - Andrea Fernández, Marcello Santangelo-Muro, Juan P. Fernández-Blázquez, Cláudio S. Lopes, Jon M. Molina-Aldareguia "Processing and properties of long recycled-carbon-fibre reinforced polypropylene"; Composites Part-B Engineering v. 211 n. 108653
Impact factor: IF JCR: 11,322 IF SCOPUS: 2,119 - Sergio de Juan, Elena Gordo, Antonia Jiménez-Morales, Frédéric Sirois "Response of electroless copper coated CFRP laminates to emulated lighting strikes"; Composites Part A-Applied Sciences and Manufacturing v. 140 n. 10618 (2021)
Impact factor: IF JCR: 9,463 IF SCOPUS: 1,655 - E. Enríquez, M. Torres-Carrasco, M.J. Cabrera, D. Muñoz, J.F. Fernández "Towards more sustainable building based on modified Portland cements through partial substitution by engineered feldspars"; Construction and Building Materials v. 269 n. 121334 (2021)
Impact factor: IF JCR: 7,693 IF SCOPUS: 1,777
- Monireh Moradienayat, Javier González-Benito, Dania Olmos "Airbrushed PSF/ZnO composite coatings as a novel approach for the consolidation of historical bones"; Nanomaterials v. 13 n. 4,625 (2023)
- Research Lines
- THESIS
Thesis defense
The doctoral thesis consists of an original research work developed by the Ph.D. candidate student in the field of knowledge of the program that enables the student for autonomous work in the field of R+D+ i.
Universidad Carlos III de Madrid and the Doctoral School establishes the follow-up procedures to guarantee the quality of the doctorate's training and supervision. It also facilitates the procedures for the proper evaluation and defense of the doctoral thesis.
Further information:
Thesis as a collection of publications
The Academic Committee of the Ph.D. Program can authorize the presentation of the doctoral thesis as a collection of publications. These are required to have a thematic coherence and meet the requirements of originality, quality, quantity and authorship by the Ph.D. candidate as regulated by the Ph.D. Program in Materials Science and Engineering. Further information: Thesis as a collection of publications
The defense of these thesis will be carried out according to the same periods, appointment of Thesis Committees, mentions, etc. than those of a thesis presented in a regular format.
Requirements for thesis defense in Materials Science and Engineering
Theses are required to meet the quality standards required by the Ph.D. Program for defense. Quality can be supported by the scientific-technical contributions derived from the thesis.
Requirements for thesis defense established by the Ph.D. Program and approved by the Directing Board of the Álvaro Alonso Barba Institute of Chemistry and Materials Technology (IAAB) at UC3M are:
- i) A seminar of approximately 30 minutes given by the Ph.D. candidate on his/her research outcomes. The seminar must take place after the first annual evaluation (with a favorable assessment) and before the application for thesis deposit. The organization of the seminars has to be carried out with the assistance of the IAAB assistant at least 10-15 days in advance. These seminars are conducted in a single public session during the last week of each month.
- ii) An article derived from the thesis research that has been published (or accepted for publication) in a journal indexed in the JCR-Journal of Citations Report during the year of its publication.
- iii) Attendance to at least two seminars for every category hosted by the Ph.D. Program (state-of-the-art and presentation of outcomes) during each academic year. Proof of attendance to seminars
Schedule and contents of these seminars will be notified to students on the Aula Global platform. This requirement will not apply during the academic year(s) in which the Ph.D. candidate has carried out research visits, scientific conferences or workshops.
- USEFUL INFORMATION
- Ph.D. Studies Overview
Our Ph.D. programs focus on the acquisition of skills and abilities required to undertake high-quality research work within the strategic framework and lines of research of the university. Students will be expected to work independently under supervision and guidance of top experts in their fields in order to produce novel, groundbreaking research work in the form of a dissertation.
The Ph.D. thesis constitutes the expected outcome of the doctoral training, stating the specifics of the research work and results. The thesis must meet the high-quality standards required by the Ph.D. program and be subject to public defense and assessment by an independent thesis committee.
A favorable assessment of the thesis enables Ph.D. students to request their official Ph.D. degree certificate, issued by the Spanish Ministerio de Educación, Cultura y Deporte.
- Useful Information site for Ph.D. students
Doctoral training calendar
Duration of the academic year: October 1st through September 30th
Process Period Admission According to the start semester of the PhD:
Second semester of the 23/24 academic year
Admission application deadline: September 1st 2023 through January 31st 2024 (23:59 h., CET)
PhD start date: March 30th 2024
First semester of the 24/25 academic year
Admission application deadline: February 1st through August 31st 2024 (23:59 h., CET)
PhD start date: November 15th 2024Enrollment According to the start semester of the PhD:
Enrollment period for new students
First semester: July 17th through 31st and September 1st through 30th (23:59 h., CET) of the current academic year
Second semester: March 1st through 30th (23:59 h., CET) of the current academic year
Enrollment period for continuing students
September 1st through 30th (23:59 h., CET) of the current academic yearAnnual Assessment June
All PhD candidates are subject to annual evaluation.
December
Only students whose June evaluation was unfavorable are subject to evaluation.
In both cases the evaluation is based on the progress of the thesis project (Reseach Plan) and the doctoral activities carried out during the academic year.
Thesis Defense Thesis defense can be carried out throughout the academic year.
- Procedures
Academic procedures
Further information
- FAQ
Ph.D. Studies
What is a Ph.D.?
A Ph.D. is a period of training in skills and abilities required to undertake independent, high-quality research work in the realm of R&D under the supervision of top experts in their respective fields.
What are the terms of access to a Ph.D. program?
As a general rule, candidates are required to hold a Bachelor’s and a Master’s degree. Credits for both must amount to at least 300 ECTS credits.
Additionally, specific requirements and candidate profiles are described in each program’s terms of access. Before applying for admission, it is strongly recommended to take the Ph.D. Programs into consideration, as well as its lines of research, profiles of the scholars involved and final results (theses and scientific publications) as proof of the program’s quality and specialization.
Shat is the duration of a Ph.D.?
The regular duration of a full-time Ph.D. program is 4 years. This period can be extended up to 5 years.
The regular duration of a part-time Ph.D. program is 7 years. This period can be extended up to 8 years.
You may apply, for justified reasons, for either an extension or a leave of absence from your Ph.D. training period to the Academic Committee of your program. Your request must be endorsed by your tutor/advisor. Further information: Duration of Ph.D. studies
Can I do my Ph.D. entirely online?
No. All Ph.D. Programs require some face-to-face activity throughout the training period. The duration of face-to-face activity is established by each Program.
How can I apply for a part-time enrollment status?
You can state your part-time enrollment status upon admission or, once you have initiated your training period, by submitting a request for justified reasons to the Academic Committee of your program. Your request must be endorsed by your tutor/advisor. Further information: Enrollment status for Ph.D. studies
If you are the recipient of a pre-doctoral contract with the UC3M, you must be a full-time student for the entire duration of the contract in application of article 21 of Law 14/2011, of the1st of June, on Science, Technology and Innovation.
Must I take any other training in addition to my research work?
Yes. There are three different types of additional training to be taken during your Ph.D.:
- Complementary training. Applicable only to students whose terms of admission state this training as required.
- Specific training. Activities within the framework of your Ph.D. program.
- Research Skills training. Courses or activities focused on abilities common to all disciplines (communication, academic writing, stress management, etc.).
Further information on Doctoral Training: Monitoring and Development of these FAQ.
A favorable assessment enables students to apply for their official Ph.D. degree certificate issued by the Spanish Ministerio de Educación, Cultura y Deporte. An additional Doctorado Internacional distinction is awarded to students who met a number of specific requirements during their training period.
What is an Interuniversity Ph.D.?Interuniversity PhDs are joint degree programs by Universidad Carlos III de Madrid in collaboration with other Spanish or international institutions. The outcome of these programs does not translate into multiple degrees but just one equivalent to the training undertaken by the student.
Admission
How can I apply for admission to a Ph.D. program?
Your application for admission must be submitted online. Signing in is previously required in order to get your login and password. Further information on how to carry out this process: Apply for admission
I have not completed my Master’s degree yet. May I apply for admission now?
According to art. 6 of the PhD studies regulation (RD 99/2011), in order to access the PhD studies it is required to have a Bachelor's degree (or equivalent) and a Master's degree (or equivalent), provided that at least 300 ECTS credits have been passed in these two cycles as a whole, or the equivalent degree qualifies for level 3 of MECES (Marco Español de Cualificaciones para la Educación Superior, Spanish Framework for Higher Education Qualifications).
Likewise, access is available to candidates in possession of foreign degrees from countries integrated into the European Higher Education Area (EHEA) when the degree can be accredited as level 7 in the European Qualifications Framework (EQF), as long as the aforementioned degree allows access to PhD level studies in the country of expedition; and candidates with a degree which is equivalent to a Spanish Master's degree, obtained in foreign education systems outside the EHEA, as long as the aforementioned degree allows access to PhD level studies in the country of expedition.When can I apply for admission?
Applications for admission for the first semester of the 24/25 academic year with start date on the 15th of November 2024 can be submitted from February 1st through August 31st 2024 (Spanish peninsular time, CET)*
Applications for admission for the second semester of the 24/25 academic year with start date on the 30th of March 2025 can be submitted from September 1st 2024 through January 31st 2025 (Spanish peninsular time, CET)*.
*Except where noted in the details of each Ph.D. Program.
The PhD academic year begins on October 1st and ends on September 30th.
What documents do I need to submit?
Scan in advance, in pdf format, the documentation requirements to be attached to your application. The documents listed below are mandatory in all cases:
- National Identity Document: DNI, NIE, or passport
- Previous degree certificate or diploma (Master’s degree or equivalent), or proof of payment of issuance fees.
- Academic transcript of previous degree (Bachelor's and Master’s degree or equivalent), including grades
- Curriculum Vitae
- Authorization of disclosure of educational and employment information
- Ph.D. research proposal
- Endorsement for thesis project
Some programs may require additional documents, such as reference letters by notable researchers, foreign language skills certificate, etc.
- Further information: Admission. Information and Requirements
Can I choose when to start my doctoral training?
Yes. As a new student, you must state in your application for admission whether you want to start your training in the first semester (November 15) or second semester (March 30).
I want to apply for a scholarship or financial aid program. Must I do it before or after applying for admission to a Ph.D.?
It is strongly recommended to apply first for your Ph.D. program of choice at uc3m, as most of the granting institutions require proof of admission (or application for admission) to a Ph.D.
Further information on Scholarships and Financial Aid Programs of these FAQ.
I submitted my application. When will I know if I am admitted?
The review process of your application consists of two stages:
- Administrative validation. Your application will be reviewed at the Doctoral School Office on campus to ensure that it meets the admission requirements. You will be contacted if necessary.
- Academic evaluation. If your application has succesfully passed the previous stage, it will be forwarded to the Academic Committee of the Ph.D. program for review. You will be notified of the Committee's decision by certified mail sent to the postal address provided in your application.
This process may take up to one-two months. You will be notified of the Committee’s resolution by e-mail.
I have been admitted. When must I submit my enrollment form?
In you are admitted to a Ph.D. program, you have to submit your online application for enrollment in the periods set by the university to that effect, according to the instructions indicated in your letter of admission, our website or the Enrollment section of this FAQ, including the payment of tuition fees. If you do not submit your enrollment for the academic year for which you were admitted, your admission will be cancelled.
What is complementary training and when should it be taken?
Complementary training is required by the Academic Committee in the admission letter, depending on the applicant's access profile.
They consist of subjects from a uc3m research master's degree, which are considered necessary to successfully complete the doctoral research.
These training complements must be taken and passed mandatorily during the first year of doctoral training.
In other words, if you start your studies in November of an academic year, the training complements must be taken in the first semester (the subjects begin in September), or in the second semester of the same academic year (the subjects begin in February).
If, on the other hand, you start your studies in March, then the complements must be taken in the same academic semester (the subjects start in February) or in the first semester of the following academic year (the subjects start in September).
These circumstances should be taken into account when planning the start of your studies at uc3m, and for the processing of visas and organisation of your stay in the country.Doctoral training scholarships. Exemptions
What types of financial aid programs can I apply for?
There is a wide variety of financial aid programs for doctoral training that cover partial or total tuition fees and, in some cases, allow uc3m to formally hire the Ph.D. student as a training researcher.
Who are the awarding bodies?
Here is a list of the most common scholarship and financial aid programs:- Formación de Investigadores del Ministerio de Innovación / Researchers Training by Ministerio de Innovación (formerly known as FPI scholarships)
- Formación de Profesorado Universitario del Ministerio de Educación / University Faculty Training by Ministerio de Educación (formerly known as FPU scholarships)
- Researchers Training by Universidad Carlos III de Madrid, awarded by the institution departments
- Ph.D. Scholarships by La Caixa
- Ph.D. Scholarships by Comunidades Autónomas (Autonomous Regions of Spain)
- Scholarships by Fundación Carolina (for Latin American students)
Further information: Doctoral Training Scholarships
When and how can I apply for these?Each granting body has its own application and awarding periods. It is strongly recommended to apply first for your Ph.D. program of choice at uc3m in all cases, as most of these institutions require proof of admission (or application for admission) to a Ph.D.
Do I have to be admitted to a Ph.D. in order to apply for admission?
It is not required in most cases, but, as pointed out previously, you must have at least submitted your application for admission in order to be eligible (check the awarding institution’s specific terms). Only if you are eventually granted the scholarship or financial aid will it be required to be admitted and enrolled on the program in order to accept the aid and be hired as a training researcher at uc3m.
I received a scholarship or financial aid. Do I have to notify uc3m?
Yes. As a recipient of any financial aids, it is recommended to notify the university for these to be applied upon enrollment. If your scholarship status is not registered in your self-enrollment application, please contact the Doctoral School Office, either in person or by e-mail at admisiondoctorado@uc3m.es
Where will I undertake my Ph.D. research work?
Your research and teaching activities (when applicable) will be carried out at the department or Institute stated in your contract within the framework of your Ph.D. program under the supervision of the tutor and advisor(s) appointed by the Academic Committee.
Who is in charge of managing my scholarship or financial aid program?Granting institutions usually delegate on uc3m the management of these aids according to the terms originally established by those and our own rules and regulations.
Who is to evaluate the progress and outcomes of my research work?
All our Ph.D. students must submit the progress of their research work for evaluation by the Academic Committee of their Ph.D. program. Recipients of any financial aid program must also provide this information to the granting body.
Are there any other tuition fees exemptions?
Yes. As a new student, if you are eligible for any of the following exemptions or discounts recognized by the Spanish administration, you must submit certified copies of the pertinent documents to the Postgraduate Office on campus before enrollment proceedings so that these exemptions apply upon enrollment.
- Large Family status: Certified copy of the Large Family status card (general or special)
- Disability: Certified copy of Disability Identification card (minimum 33% disability)
- Other: Certified copy of proof of exemption for victims of terrorist attacks (including their spouses and children) or children of civil and military servants who perished in the line of duty.
These documents must be valid for the academic year for which the exemption is requested.
Enrollment
How to enroll
Our Ph.D. Management platform allows to process your enrollment online. To access the platform, enter your UC3M username and password.
When to enroll
New students can choose the start date of the Ph.D. studies. Enrollment period varies accordingly:
Students starting first semester:
- Enrollment period: you may check the enrollment period on our website.
- Start date of Ph.D. training: November 15
Students starting second semester*:
- Enrollment period: March 1st through 30th (23:59 h., Peninsular Spanish time)
- Start date of Ph.D. training: March 30
*In these cases, students benefit from a reduced tuition fee, applicable only for first-year enrollment.
Your start date will determine the length of your Ph.D. training period.
As a continuing student, the enrollment period is September 1st through 30th (23:59 h., Peninsular Spanish time) of each academic year.
What modules should I register on my application?
You must select the following modules of your enrollment application:
- Ph.D. Monitoring for your doctoral training year.
Required in all cases. It will be registered by default in your application.
- Complementary credits.
Only applicable if the Academic Committee of your program established these credits as obligatory in its admission resolution, in which case you have been properly notified in your admission letter. These credits will be registered by default in your application.
Other activities of your doctoral training may not require enrollment. If so, our Doctoral School Office is in charge of the registration process:
- Specific training: Activities included in the curriculum of your Ph.D. program.
- Research Skills training: Only required for students of some Ph.D. programs.
What are the costs of tuition fees?
These are the tuition fees for all your Ph.D. training:
- Academic fees
Academic monitoring of Ph.D. training year.
- Ordinary fee (full-time, starting first semester): 390 €.
- Reduced fee* (full-time, starting second semester): 234 €.
- Reduced fee (part-time, starting first or second semester): 234 €.
*Full fees will apply in subsequent years.
Training credits
- Complementary training (only for students who are required to take these credits as established in their resolution of admission). If the subjects are the same as subjects from an official degree, the price will be the same as in the original degree. The prices range from € 45,02 to € 80-150 €, depending on the master's program and the doctoral year of enrollment (first, second or subsequent).
- Research Skills training courses. 45,02 € per credit. Credits from other institutions also require an enrollment at UC3M . A reduced 25% fee will apply in these cases (11,25 € per credit).
Thesis defense. 143,15 €
Ph.D. Degree Certificate. 229,86 €
- Administrative fees
- Registrar’s Office expenses. 6,11 €
- Academic record proceedings (first-year students only). 27,54 €
- School insurance. 1, 12 €. Applicable to Spanish or international students (legal residents) under 28 years of age.
Students who fail to fulfill the payment of these fees will be dismissed from the Ph.D. program.
Further information: Tuition fees
How do I validate my first-year enrollment?
Upon completion and payment of your enrollment, the Doctoral School will get in touch with you and set an appointment to provide the original documents to have your enrollment validated in compliance with the access requirements to Ph.D.
Documents
According to your previous studies, the documents to be submitted are listed below:
1. If you have taken an official Master's degree at UC3M, you are not required to submit any documents. The Doctoral School will check your records accordingly.
2. If your access degree for Ph.D. was issued by a University from Spain or a European Union country, or a state of the European Economic Area or Switzerland, it is required to provide the following original documents:
- Access degree certificate for Ph.D. (Master's degree or equivalent) or payment receipt of issuance fees.
- Grades certificate of access degree to Ph.D. (Master's degree or equivalent).
3. If your access degree for Ph.D. was issued by a University from a country other than the ones indicated above, it is required to provide the following legalized documents:
- Access degree certificate for Ph.D. (Master's degree or equivalent) or payment receipt of issuance fees.
- Grades certificate of access degree to Ph.D. (Master's degree or equivalent).
There are different ways to have your documents legalized. Find which legalization procedure applies in your case: Legalization of Foreign Degrees
Please note that the legalization procedure must be carried out from the home country. It is strongly recommended to do it in advance.
Original hard copies of the documents must be provided along with their photocopies. The Doctoral School will check both originals and their copies and have them certified. If the degree certificates and documents have an electronic signature or digital certification (with safe verification codes), these will be submitted by e-mail at admisiondoctorado@uc3m.es.
All documents must be submitted in Spanish, English, French, Italian or Portuguese (certificates and degrees provided in other languages must have attached an official Spanish translation).
The submission period will be notified by e-mail within a month after the end of the enrollment period.
What are my rights and obligations as a uc3m student?
Please refer to the following documentation issued by the regional authorities and uc3m. All of them apply to Ph.D. candidates at Uc3m.- Students Statute of the Region of Madrid (Estatuto del estudiante de la Comunidad de Madrid)
- uc3m students Rights and Obligations (Carta de los derechos y deberes del estudiante en la uc3m)
- Rules and Regulations of the Doctoral School at uc3m (Reglamento de la Escuela de Doctorado de la uc3m)
- Good Practices of the Doctoral School at uc3m (Código de buenas prácticas de la Escuela de Doctorado de la uc3m)
Additionally, you have access to the university's support services to students and researchers.
Further information: Rules and Regulations
Ph.D. Studies: Monitoring and Development
How are my Ph.D. supervisors appointed?
Ph.D. tutors and advisors are advanced members of the uc3m faculty or other research institutions who serve as mentors of your research work and keep track of your progress. They also facilitate your communication with the Academic Committee of the program.
Tutors are appointed by the Committee upon your admission. Tutors must hold a Ph.D. degree and have ties with the program, as well as a proven track record in research of at least six years (or proof of equivalent qualifications).
The Committee will also appoint an advisor within three months from initial enrollment on the program. Thesis advisors must hold a Ph.D. degree and have a proven track record in research of at least six years (or equivalent qualifications), as well as specific research experience in the field of your thesis. Advisors' may be based at any university, center or institute in Spain or abroad. A professor may be appointed as both tutor and advisor of a Ph.D. student.
The Academic Committee may change these designations throughout your doctoral training period for justified reasons.
Must I take any other training in addition to my research work?
Yes. There are three different types of additional training to be taken during your Ph.D.:
- Complementary training. Maximum: 40 ECTS credits. Applicable only to students whose terms of admission state this training as required. The Academic Committee will determine the credit-based courses or subjects in the admission resolution. As a general rule, this training must be taken during the first year.
- Specific training. Students are also expected to participate in a number of activities relevant to their field of research: seminars, meetings, conferences, courses, etc. These activities may require prior enrollment at uc3m. Your tutor or advisor will confirm the contents of your specific training program.
- Research Skills training. Some Ph.D. programs at uc3m require training in research skills focused on abilities common to all disciplines (communication, academic writing, stress management, etc.). These credits can be earned at either uc3m or other institutions and require formal enrollment at uc3m in all cases, as well as the approval of your tutor or advisor.
How is the progress of my research evaluated?
The Academic Committee of your program will evaluate the progress of your research project and activity report on an annual basis in the month of June. Grounds for evaluation are to be registered in the following documents:
- Research Plan. Not to be mistaken for the research proposal submitted when applying for admission. As a new Ph.D. student, you must elaborate an initial Research Plan within the first year of your doctoral training period. This plan will serve as a tracking tool of your project, listing the objectives and methodology of your research as well as a comprehensible timeline stating the periods estimated for the achievement of each goal. It must have attached your tutor or advisor's evaluation report in order to be submitted for assessment to the Academic Committee of your program.
An annual update of this Plan must be submitted in subsequent years, with the corresponding tutor or advisor’s evaluation report, so that all parties involved in your doctoral training can track and assess your progress.
- Activity Report. In addition to your Research Plan (initial or updated), it is also required to register any activity relevant to your Ph.D. research: courses, seminars, meetings, conventions, publications, international fellowship programs, etc. Be sure to have attached all certificates and/or work papers as proof of completion.
In the event of an unfavorable assessment by the Academic Committee, you will be subjected to evaluation again in December.
TWO CONSECUTIVE UNFAVORABLE ASSESSMENTS (JUNE AND DECEMBER) WILL RESULT IN THE CANCELLATION OF YOUR ENROLLMENT AS A Ph.D. STUDENT
Can I join an international research visit program?
Yes. Undertaking a period of research abroad is a requirement for Doctorado Internacional distinction eligibility. Among other requirements, your visit must have a minimum duration of three months; also, the report of activities and outcomes of your research at the host institution must be written and presented in one of the languages used for scientific dissemination in your field of research (different from any of Spain’s official languages). Prior approval by your tutor/advisor and the Academic Committee of your program is required. The Committee will evaluate your visiting research reports and, if approved, submit your candidacy for the Doctorado Internacional distinction to the Doctoral School Board.
Thesis defense
What is a Ph.D. thesis?
The Ph.D. thesis is the intended outcome of the doctoral training period. The thesis must give account of the student’s scientific work and meet the quality standards established by the Academic Committee of the program. Theses are defended in a public dissertation event, where they are subjected to assessment by an expert committee.
As a general rule, Ph.D. candidates must have been enrolled on their program for a minimum period of 24 months before initiating thesis defense proceedings.
I have approval to proceed to the thesis defense. What are the stages of this process?
Once you get approval for your thesis defense by your tutor, advisor and Academic Committee, a minimum span of 8 weeks (excluding holiday periods) is usually required to go through these stages:
- Plagiarism management procedure
- Thesis deposit. Three weeks.
- Approval of thesis defense and appointment of Thesis Committee by the Dean of Doctoral School. One week.
- Defense session logistics. Three weeks.
- Thesis defense
What is the plagiarism management procedure?
To ensure compliance with the principles established in the Code of Good Practice for Managing Plagiarism of Ph.D. Theses of the Doctoral School, all theses must be subjected to a plagiarism management procedure prior to the authorization of the defense.
Once the Academic Committee of your Ph.D. program determines that your research period is done and your thesis is ready for deposit, a pdf file of the thesis will be submitted to the Doctoral School to proceed to the plagiarism management.
The results of this study will be at the disposal of the members of the thesis committee, should they be requested.
Further information: Plagiarism management
What is the thesis deposit?
The deposit of your thesis enables UC3M professors and scholars of your field to review your work before the defense. The deposit period is 15 days (excluding August), after which all comments and observations by the experts will be reported to the Academic Committee and yourself.
Further information: Thesis deposit
Who approves the defense?
Once your thesis has successfully passed both stages, the Academic Committee of the program will elaborate their proposal for thesis defense, providing details of the proposed members of the Thesis Committee on the Authorization of thesis defense and appointment of Thesis Committee. Eligibility for “Doctorado Internacional”, “Doctorado Industrial” or International Cotutelle must be indicated, where applicable.
This proposal will be submitted for the Dean of the Doctoral School's approval of the thesis defense and the appointment of Thesis Committee members.
Who can be a member of the Thesis Committee?
The Thesis Committee consists of three members (President, Secretary, and a spokesperson) and a substitute. All of them must hold a Ph.D. degree and a proven track record in research. In all cases, the Committee will be formed by a majority of members external to the University and to the institutions collaborating with the School or the Ph.D. Program.
Further information: Defense session. Appointment of Committee members
How is the thesis defense organized?
Once all authorizations are signed, the Thesis Committee’s Secretary will appoint a date for the defense. The Doctoral School Office on campus will be in charge of the logistics of the event (room reservations, technical equipment, etc.) and the travel procedures of the committee members, when applicable.
Additionally, the Postgraduate Office will submit a digital copy of the thesis to each member of the Thesis Committee at least 15 days prior to the defense session. This file will contain any allegation or comment submitted by the experts during the deposit period.
Further information: Defense session. Appointment of Committee members
Do I have to pay any fees before the defense?
Yes. The payment of thesis defense fees must be fulfilled before proceeding to defense. Additionally, payment of enrollment fees for the academic year in which the defense takes place must be up to date.
How is my thesis assessed?
All Committee members must receive a copy of the thesis 15 days prior to the defense event.
Once the Ph.D. candidate completes his/her dissertation, the Committee can provide feedback or pose questions. Their global assessment will be given in terms of Fail (No Apto), Pass (Aprobado), Good (Notable) or Excellent (Sobresaliente).
Theses with an Excellent (Sobresaliente) grade are eligible for the cum laude distinction. The committee members will subsequently cast their votes via separate secret ballot in closed session. Only if all votes are favorable will the committee submit their proposal for the thesis to be awarded the cum laude distinction to the university Chancellor. In this case, each member of the committee will finally cast their vote, anonymously and in a sealed envelope, for the thesis to be considered for the Outstanding Thesis Award by Universidad Carlos III de Madrid.
How can I apply for my Ph.D. certificate?
Your application for the official Ph.D. degree certificate and the payment of the corresponding fees is done online.
Issuance of your certificate may take a few months. Until then, you may apply for a temporary certificate as proof of completion of your Ph.D. studies as of the date of your thesis defense.
Where is my Ph.D. thesis published?
Your thesis will be published in e-archivo, the open online repository of Universidad Carlos III de Madrid, and Teseo the Ph.D. database managed by the Ministry of Universities. In the event of partial or temporary restrictions pertaining to the publication of your thesis, you must report them to the university.
Glossary of terms
Ph.D. Program. Array of training and activities oriented to the acquisition of abilities required to undertake autonomous research work in the realm of R&D. Each Ph.D. program establishes their own procedures and lines of research for the development of theses within the framework of their respective fields.
Academic Committee. The coordinator/director of the program and two other Ph.D. members constitute a program's Academic Committee, the body in charge of the various training areas and research progress of the program, as well as the authorization of thesis defense of their Ph.D. candidates.
Doctoral School. Academic body in charge of the management and coordination of all Ph.D. programs.
Ph.D. Thesis. Original piece of research carried out by Ph.D. candidates in their field of knowledge. Presented as a written dissertation according to the quality, content and format guidelines set by the Ph.D. program for its public defense.
Tutor. Supervisor in charge of tracking the training progress of the Ph.D. candidate and serving as a communication link between the researcher and the Academic Committee. Tutors must be attached to uc3m faculty with a proven research track record. Tutors are appointed upon approval of admission by the Academic Committee.
Thesis advisor. Supervisor in charge of tracking the training progress of the Ph.D. candidate. Advisors are experts in the field of the Ph.D. candidate's research, not necessarily attached to uc3m faculty (if they are, they can also be appointed as tutors). Advisors are appointed within the first three months of the student's Ph.D. training period. A student may have more than one advisor.
Specific training. Specific activities pertaining to the field of research of each Ph.D., designed to provide students with the knowleddge and opportunity for debate required for the development of their research work: seminars, meetings, conferences/dissertations, international research visits, etc.
Research Skills training. Training activities oriented to the acquisition of skills common to all disciplines. All students are required to earn at least 6 credits (60 hours) throughout their doctoral training period. Enrollment on these courses is performed separately from their regular doctoral training.
Complementary training. Maximum 40 ECTS credits. Training that the Academic Committee may deem necessary in their admission resoluction in order to complement the Ph.D. candidate's previous academic background. Enrollment on these credits will be required in addition to the student's regular doctoral training. These credits are usually earned during the first Ph.D. year.Research plan. Document to be drafted within the first six months of Ph.D. training detailing the student’s research project to be subjected to annual evaluation every month of June. It must be approved by the tutor, the thesis advisor and the Academic Committee. This plan must be updated and submitted for review and evaluation purposes on a yearly basis.
Ph.D. Activity report. A registration account of all training activities pertaining to the Ph.D. student's research. The tutor and thesis advisor must endorse these activities for them to be submitted to the Academic Committee for annual evaluation in June.
Student record. Academic details of every Ph.D. student as registered in uc3m databases, including activities and credits completed. This information is to be attached to the thesis in the final stages of defense approval.
Academic transcript. Official document signed by the Head of Doctoral Studies certifying a student's academic record.
Monitoring and assessment. Annual process by which the research progress and activities of a Ph.D. candidate are subjected to evaluation by the Academic Committee.Written Agreement. Document signed by all parties involved in a thesis research project (Ph.D. student, tutor, advisor/s, and Academic Committee) stating their roles and specific conditions pertaining to confidentiality agreements, copyright or use and distribution of research outcomes, where applicable, as well as conflict resolution procedures.
Thesis public review. Procedure required to allow the academic community to review the student's thesis and issue comments and observations prior to the defense. The thesis is usually deposited at the university's intranet.
Thesis defense. Academic event open to the public in which Ph.D. candidates defend their research work before a committee of experts in their field. The defense is followed by a question and answer session led by the defense committee in order for it to give their assessment.Defense committee. Committee consisting of three experts with proven track records of research in the field of the thesis, most of which must be based outside uc3m. The committee gives their assessment of the thesis and awards the cum laude distinction and the Outstanding Thesis Award candidacy, where applicable.
- Itinerary
- Regulations
- NEW! RD 99/2011. Rules and Regulations of doctoral studies in Spain.
Approved on July 4, 2023 - Royal Decree 99/2011. Rules and Regulations of Ph.D. studies in Spain.
- Establishment of the Doctoral School. Order 2091/2013.
- Rules and Regulations of the Doctoral School at Universidad Carlos III de Madrid approved by Governing Council on February 7, 2013; modified on November 28, 2013.
- Code of Good Practice of the Doctoral School
- Code of Good Practice for Managing Plagiarism of Ph.D. Theses
- Code of Good Practice for Managing Plagiarism of Ph.D. ThesesGuide for personal data treatment on the doctoral thesis process. Further information: Data protection
- Outstanding Thesis Awards Regulations
- Royal Decree 967/2014. Declaration of Ph.D. academic equivalency for foreign higher-education studies.
- Application procedure for Ph.D. academic equivalency for foreign higher-education studies, approved by Governing Council on January 28, 2016.
- NEW! RD 99/2011. Rules and Regulations of doctoral studies in Spain.
- Quality
GENERAL INFORMATION ABOUT PH.D.
☛ Implementation Year: 2012-2013
QUALITY ASSURANCE
The Academic Committee of the Ph.D. complies with the SGIC-UC3Mis responsible for ensuring the quality of the Ph.D. Program and produces the Degree Reports ("Memoria Académica de Titulación").
- Academic Committee
- Reports from the Quality Assurance Committee (Restricted access)
QUALITY INDICATORS
COMPLAINTS AND SUGGESTIONS
- Ph.D. Studies Overview
- CONTACT
Doctoral School Office | Leganés Campus
Rey Pastor Building, Office 3.0.B.08
Avenida de la Universidad, 30
28911 Leganés (Madrid)