Universidad Carlos III de Madrid - UC3M

Listado de artículos desde el año 2003 publicados en revistas indexadas en el JCR

2010

Title: Experimental analysis of perforation of glass/polyester structures subjected to high-velocity impact

Author(s): Buitrago, B.L., Garcia-Castillo S.K., Barbero, E.
Source: Material Letters (General Ed.), Vol. 64(9), 2010, pp. 1052-1054.

Title: Modelling of composite sandwich structures with honeycomb core subjected to high-velocity impact

Author(s): Buitrago, B.L., Santiuste, C., Sánchez-Sáez, S., Barbero, E., Navarro, C.
Source: Composite Structures, Vol. 92(9), 2010, pp. 2090-2096.

Title: On the path and area Jx1-integral components and their relationship to the out-of-plane constraint in elastic cracked plates

Author(s): Fernandez-Canteli, A.; Giner, E.; Fernandez-Zuñiga, D.; Fernandez-Saez, J.
Source: Key Engineering Materials, Vol. 45, 2010, pp. 421-424.

Title: On the Jx1-integral and the out-of-plane constraint in a 3D elastic cracked plate loaded in tension.

Author(s): Giner, E.; Fernandez-Zuñiga, D.; Fernandez-Saez, J.;Fernandez-Canteli, A.
Source: International Journal of Solids and Structures, Vol. 47, 2010, pp. 934-946.

Title: Determination of the Constitutive Relation Parameters of a Metallic Material by Measurement of Temperature Increment in Compressive Dynamic Tests.

Author(s): Guzman R.E.; Zahr J.A.; Perez J.L.; Melendez, J.
Source: Experimental Mechanics, Vol. 50(3), 2010, pp. 389-397.

Title: FEM analysis of dynamic flexural behaviour of composite sandwich beams with foam core.

Author(s): Ivañez I.; Santiuste C.; Sanchez-Saez S.
Source: Composite Structures, Vol. 92, 2010, pp. 2285-2291.

Title: Crack-front propagation during three-point-bending tests of polymethyl-methacrylate beams.

Author(s): Loya J.A.; Villa E.I.; Fernandez-Saez J.
Source: Polymer testing, Vol. 29(1), 2010, pp. 113-118.

Title: First-Order Solutions for the Buckling Loads of Euler-Bernoulli Weakened Columns.

Author(s): Loya, J.A.; Vadillo, G.; Fernandez-Saez, J.
Source: Journal of Engineering Mechanics-ASCE, Vol. 136, Núm. 5, 2010, pp. 674-679,

Title: Improvement of chatter stability in boring operations with passive vibration absorbers.

Author(s): Miguelez, M.H.; Rubio, L.; Loya, J.A.; Fernandez-Saez, J.
Source: Journal of Mechanics Sciences, Vol. 52(10), 2010, pp. 1376-1384.

Title: Temperature increment during quasi-static compression tests using Mg metallic alloys.

Author(s): Perez, J.L.; Guzman, R.E.; Rusinek, A.; Melendez, J.
Source: Materials & Desing, Vol. 31(7), 2010, pp. 3259-3269.

Title: Thermo-mechanical behaviour of TRIP 1000 steel sheets subjected to low velocity perforation by conical projectiles at different temperatures

Author(s): Rodriguez, J.A.; Pesci, R.; Rusinek, A.; Arias, A.;Zaera R.; Arias D.
Source: International Journal of Solids and Structures, Vol. 47(9), 2010, pp. 1268-1284.

Title: Experimental survey on the behaviour of AISI 304 steel sheets subjected to perforation

Author(s): Rodriguez, J.A.; Rusinek, A.; Pesci, R..
Source: Thin-walled Structures, Vol. 48(12), 2010, pp. 966-978.

Title: Temperature measurements on ES steel sheets subjected to perforation by hemispherical projectiles.

Author(s): Rodriguez, J.A.; Rusinek, A.; Chevrier, P.; Bernier, R.; Arias A.
Source: International Journal of Impact Engineering, Vol. 37(7), 2010, pp. 828-841.

Title: A Note on the Use of Approximate Solutions for the Bending Vibrations of Simply Supported Cracked Beams

Author(s): Rubio, L:; Fernandez-saez, J.
Source: International Journal of Vibrations and Acoustics, Vol. 132(2), 2010, 024504.

Title: A thermo-viscoplastic constitutive model for FCC metals with application to OFHC copper.

Author(s): Rusinek, A.; Rodriguez J.A.; Arias A.
Source: International Journal of Mechanical Sciences, Vol. 52(2), 2010, pp. 120-135.

Title: Experimental characterisation and modelling of the thermo-viscoplastic behaviour of steel aisi 304 within wide ranges of strain rate at room temperature.

Author(s): Rusinek, A.; Rodriguez J.A.; Pesci R.; Capelle J.
Source: Journal of Theoretical and Applied Mechanics, Vol. 48(4), 2010, pp. 1027-1042.

Title: Residual flexural strength after low-velocity impact in glass/polyester composite beams.

Author(s): Santiuste, C.; Sánchez-Sáez, S.; Barbero, E.
Source: Composite Structures, Volume 92(1), 2010, pp. 25-30.

Title: Machining FEM model of long fiber composites for aeronautical component.

Author(s): Santiuste, C.; Soldani, X.; Miguelez, M.H.
Source: Composite Structures, Vol. 3(92), 2010, pp. 691-698.

Title: A comparison of progressive-failure criteria in the prediction of the dynamic bending failure of composite laminated beams

Author(s): Santiuste, C.; Sánchez-Sáez, S.; Barbero, E.
Source: Composite Structures,Vol. 92(10), 2010, pp. 2406-2414.

Title: Some applications of Burzynski yield condition in metal plasticity.

Author(s): Vadillo, G.; Fernandez-Saez, J.; Pecherski, R.B.
Source: Materials & Desing, Vol. 32(2), 2010, pp. 628-635.

2009

Title: Thermo-viscoplastic constitutive relation for aluminium alloys, modelling of negative strain rate sensitivity and viscous drag effects

Author(s): Rusinek A., Rodriguez-Martinez J.A.
Source: Materials and Design, Vol. 36, 2009, pp. 4377-4390.

Title: Extension of R-K constitutive relation to phase transformation phenomena

Author(s): Rodriguez J.A., Rusinek A., Pecherski R.B., Klepaczko J.R.
Source: Materials and Design, Vol. 30(7), 2009, pp. 2513-2520.

Title: Constitutive relation for steels approximating quasi-static and intermediate strain rates at large deformations

Author(s): Rodriguez J.A., Rusinek A., Klepaczko J.R.br> Source: Mechanics Research Communications, Vol. 36, 2009, pp. 419-427.

Title: Relation between strain hardening of steel and critical impact velocity in tension

Author(s): Rodriguez J.A., Rusinek A., Arias A.br> Source: Journal of Theoretical and Applied Mechanics, Vol. 47(3), 2009, pp. 645-665.

Title: An efficient implementation of boundary conditions in an ale model for orthogonal cutting

Author(s): Miguélez, M. H. ; Muñoz, A. ; Cantero, J. L. ; Loya, J. A..
Source: Journal of Theoretical and Applied Mechanics, Vol. 47(3), 2009, pp. 599-616.

Title: An analysis of Gurson model with parameters dependent on triaxiality based on unitary cells

Author(s): G. Vadillo, J. Fernández-Sáez.
Source: European Journal of Mechanics A/Solids 28 (2009) 417-427.

Title: Simplified longitudinal seismic response of tunnels linings subjected to surface waves

Author(s): A.L. Sánchez-Merino, J. Fernández-Sáez, C. Navarro.
Source: Soil Dynamics and Earthquake Engineering 29 (2009) 579-582.

Title: Determination of the constitutive relation parameters of a metallic material by measurement of temperature increment in compressive dynamic tests

Author(s): R. Guzmán, J. Meléndez, J. Zahr, J. L. Pérez-Castellanos.
Source: Experimental Mechanics.

Title: Numerical modelling of the Hydrodynamic Ram phenomenon

Author(s): D. Varas, R. Zaera, J. López-Puente.
Source: International Journal of Impact Engineering, 36, 363-374.

Title: Residual stresses in orthogonal cutting of metals: the effect of thermo-mechanical coupling parameters and of friction

Author(s): M.H. Miguélez, R. Zaera, A. Molinari, R. Cheriguene, A. Rusinek.
Source: Journal of Thermal Stresses, 32, 269-289.

Title: Experimental and numerical study on the perforation process of mild steel sheets subjected to perpendicular impact by hemispherical projectiles

Author(s): A. Rusinek, J. A. Rodríguez-Martínez, R. Zaera, J. R. Klepaczko, A. Arias, C. Sauvelet.
Source: International Journal of Impact Engineering, 36, 565-587.

Title: Free transverse vibrations of cracked nanobeams using a nonlocal elasticity model

Author(s): Loya J.A., López-Puente J., Zaera R., Fernández-Sáez J.
Source: Journal of Applied Physics, 105, 044309, (2009).

Title: Analytical modelling of high velocity impacts of cylindrical projectiles on carbon/epoxy laminates

Author(s): López-Puente J., Varas D., Loya J.A., Zaera R.
Source: Composites Part A-Applied Science and Manufacturing. Vol. 40 Issue 8, Pgs. 1223-1230. Aug. 2009.

Title: Experimental analysis of fluid-filled aluminum tubes subjected to high-velocity impact

Author(s): López-Puente J., Varas D., Zaera R.
Source: International Journal of Impact Engineering. Vol. 36, Issue 1, Pgs. 81-91, Jan 2009.

Title: Impact Load Behaviour of Resin Transfer Moulding (RTM) Hemp Fibre Composite Laminates

Author(s): Scarponi, C.; Pizzinelli, C.S.; Sánchez-Sáez, S.; Barbero, E.
Source: Journal of Biobased Materials and Bioenergy, Vol. 3, Num. 3, 2009, pp. 298-310.

Title: Impact behaviour of preloaded glass/polyester woven plates

Author(s): S.K. García-Castillo, S. Sánchez-Sáez, J. López-Puente, E. Barbero, C. Navarro.
Source: Composites Science and Technology, Vol. 69, 2009, pp. 711-717.

Title: Modelling of thermo-visco-plastic behaviour of DH-36 and WELDOX-460-e structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations and impact application for impact problems

Author(s): Klepaczko J. R., Rusinek A., Rodríguez-Martínez J.A., Pecherski R., Arias A.
Source: Mechanics of Materials. Vol. 41(5), Pgs. 599-621, 2009.

Title: Relationship between mesostructure, mechanical Behaviour and damage of cement composites under high-pressure confinement

Author(s): P. Forquin, A. Arias, R. Zaera.
Source: Experimental Mechanics, Vol. 49, 2009, pp. 613-625.

Title: Analysis of the thermo-visco-plastic behaviour of six high strength steels

Author(s): Rusinek A., Rodríguez-Martínez J. A. Klepaczko J. R., Pecherski R. B.
Source: MATERIALS & DESIGN, Vol. 36(4), 2009, pp. 565-587.

Title: Measurement of temperature increment in compressive quasi-static and dynamic tests using the infrared thermography

Autores: R. Guzmán, J. Meléndez, J. Aranda, Y.E. Essa, F. López y J. L. Pérez-Castellanos.
Source: Strain, Vol. 45, 2009, pp. 179-189.

2008

Title: Numerical modeling of the impact behavior of new particulate-loaded composite materials function method

Author(s): C. Santiuste, S. Sánchez-Sáez, E. Barbero.
Source: International Journal of Mechanical Sciences, In Press, Accepted Manuscript, Available online 31 October 2008.

Title: A new tool based on Artificial Neural Networks for the design of lightweight ceramic-metal armour against high-velocity impact of solids

Author(s): D. Fernández-Fdz, R. Zaera.
Source: International Journal of Solids and Structures, In Press, Accepted Manuscript, Available online 19 August 2008.

Title: Relationship between static bending and compressive behaviour of particle-reinforced cement composites

Author(s): A. Arias, P. Forquin, R. Zaera.
Source: Composites Part B: Engineering, Volume 39, Issues 7-8, October-December 2008, Pages 1205-1215.

Title: Effect of plastic deformation and boundary conditions combined with elastic wave propagation on the collapse site of a crash box

Author(s): Rusinek A, Zaera R, Forquin P, et al.
Source: THIN-WALLED STRUCTURES Volume: 46 Issue: 10 Pages: 1143-1163 Published: OCT 2008.

Title: Prediction of the behaviour of CFRPs against high-velocity impact of solids employing an artificial neural network methodology

Author(s): Fernandez-Fdz D, Lopez-Puente J, Zaera R.
Source: COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING Volume: 39 Issue: 6 Pages: 989-996 Published: 2008.

Title: Compressive residual strength at low temperatures of composite laminates subjected to low-velocity impacts

Author(s): Sanchez-Saez S, Barbero E, Navarro C.
Source: COMPOSITE STRUCTURES Volume: 85 Issue: 3 Pages: 226-232 Published: OCT 2008.

Title: Influence of conical projectile diameter on perpendicular impact of thin steel plate

Author(s): Rusinek A, Rodriguez-Martinez JA, Arias A, et al.
Source: ENGINEERING FRACTURE MECHANICS Volume: 75 Issue: 10 Pages: 2946-2967 Published: JUL 2008.

Title: Three-dimensional effects on the dynamic fracture determination of Al 7075-T651 using TPB specimens

Author(s): Loya JA, Fernandez-Saez J.
Source: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES Volume: 45 Issue: 7-8 Pages: 2203-2219 Published: APR 2008.

Title: Numerical simulations of impact behaviour of thin steel plates subjected to cylindrical, conical and hemispherical non-deformable projectiles

Author(s): Arias A, Rodriguez-Martinez JA, Rusinek A.
Source: ENGINEERING FRACTURE MECHANICS Volume: 75 Issue: 6 Pages: 1635-1656 Published: APR 2008.

Title: Role of porosity in controlling the mechanical and impact behaviours of cement-based materials

Author(s): Forquin P, Arias A, Zaera R.
Source: INTERNATIONAL JOURNAL OF IMPACT ENGINEERING Volume: 35 Issue: 3 Pages: 133-146 Published: MAR 2008.

Title: Consistent integration of the constitutive equations of Gurson materials under adiabatic conditions

Author(s): Vadillo G, Zaera R, Fernandez-Saez J.
Source: COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING Volume: 197 Issue: 13-16 Pages:1280-1295 Published: 2008.

Title: Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates

Author(s): Lopez-Puente J, Zaera R, Navarro C.
Source: COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING Volume: 39 Issue: 2 Pages: 374-387 Published: 2008.

2007

Title: Constitutive relations in 3-D for a wide range of strain rates and temperatures - Application to mild steels

Author(s): Rusinek A, Zaera R, Klepaczko JR.
Source: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES Volume: 44 Issue: 17 Pages: 5611-5634 Published: AUG 15 2007.

Title: Residual stresses in ceramic-to-metal-joints: Diffraction Measurements and FEM analysis

Autores: M. Vila, C. Prieto, J. Zahr, J. L. Pérez-Castellanos, G. Bruno, M. Jiménez-Ruiz, P. Miranzo, M.I. Osendi.
Source: Phylosophical Magazín, 2007.

Title: Analysis of the dynamic flexural behaviour of composite beams at low temperature

Author(s): Sanchez-Saez S, Barbero E, Navarro C.
Source: COMPOSITES SCIENCE AND TECHNOLOGY Volume: 67 Issue: 11-12 Pages: 2616-2632 Published: SEP 2007.

Title: Application of the flexibility influence function method in the dynamic analysis of composite beams

Author(s): Santiuste C, Sanchez-Saez S, Barbero E.
Source: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES Volume: 44 Issue: 14-15 Pages: 4795-4809 Published: JUL 2007.

Title: An experimental method of measuring the confined. compression strength of geomaterials

Author(s): Forquin P, Arias A, Zaera R.
Source: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES Volume: 44 Issue: 13 Pages: 4291-4317 Published: JUN 15 2007.

Title: Cost-effective optoelectronic system to measure the projectile velocity in high-velocity impact testing of aircraft and spacecraft structural elements

Author(s): Sanchez-Pena JM, Marcos C, Fernandez MY, et al.
Source: OPTICAL ENGINEERING Volume: 46 Issue: 5 Article Number: 051014 Published: MAY 2007.

Title: Numerical simulation and experimental study of a mechanism for Hopkinson bar test interruption

Author(s): Essa YES, Lopez-Puente J, Perez-Castellanos JL.
Source: JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN Volume: 42 Issue: 3 Pages: 163-172 Published: APR 2007.

Title: An analytical model for high velocity impacts on thin CFRPs woven laminated plates

Author(s): Lopez-Puente J, Zaera R, Navarro C.
Source: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES Volume: 44 Issue: 9 Pages: 2837-2851 Published: MAY 1 2007.

Title: Prediction of the response under impact of steel armours using a multilayer perceptron

Author(s): Garcia-Crespo A, Ruiz-Mezcua B, Fernandez-Fdz D, et al.
Source: NEURAL COMPUTING & APPLICATIONS Volume: 16 Issue: 2 Pages: 147-154 Published: FEB 2007.

Title: Influence of porosity on cavitation instability predictions for elastic-plastic solids

Author(s): Tvergaard V, Vadillo G.
Source: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Volume: 49 Issue: 2 Pages: 210-216 Published: FEB 2007.

Title: General expressions for the stress intensity factor of a one-point bend beam

Author(s): Villa I, Loya JA, Fernandez-Saez J.
Source: ENGINEERING FRACTURE MECHANICS Volume: 74 Issue: 3 Pages: 373-385 Published: FEB 2007.

Title: Dynamic fracture-initiation toughness determination of Al 7075-T651 aluminum alloy

Author(s): Loya JA, Fernandez-Saez J.
Source: JOURNAL OF TESTING AND EVALUATION Volume: 35 Issue: 1 Pages: 25-30 Published: JAN 2007.

Title: Finite element simulation of steel ring fragmentation under radial expansion

Author(s): Rusinek A, Zaera R.
Source: INTERNATIONAL JOURNAL OF IMPACT ENGINEERING Volume: 34 Issue: 4 Pages: 799-822 Published: APR 2007.

2006

Title: Numerical modelling of orthogonal cutting: Influence of cutting conditions and separation criterion

Author(s): Miguelez H, Zaera R, Rusinek A, et al.
Source: JOURNAL DE PHYSIQUE IV Volume: 134 Pages: 417-422 Published: AUG 2006.

Title: An experimental method of measuring the confined compression strength of high-performance concretes to analyse their ballistic behaviour

Author(s): Forquin P, Arias A, Zaera R.
Source: JOURNAL DE PHYSIQUE IV Volume: 134 Pages: 629-634 Published: AUG 2006.

Title: Determination of the dynamic stress intensity factor of a specimen under one-point bending from the measurement of the load-point displacement

Author(s): Loya JA, Villa I, Fernandez-Saez J, et al.
Source: JOURNAL DE PHYSIQUE IV Volume: 134 Pages: 827-832 Published: AUG 2006.

Title: Response of pre-loaded laminate composite plates subject to high velocity impact

Author(s): Garcia-Castillo SK, Sanchez-Saez S, Barbero E, Navarro C.
Source: JOURNAL DE PHYSIQUE IV Volume: 134 Pages: 1257-1263 Published: AUG 2006.

Title: An implicit consistent algorithm for the integration of thermoviscoplastic constitutive equations in adiabatic conditions and finite deformations

Author(s): Zaera R, Fernandez-Saez J.
Source: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES Volume: 43 Issue: 6 Pages: 1594-1612 Published: MAR 2006.

Title: Natural frequencies for bending vibrations of Timoshenko cracked beams

Author(s): Loya JA, Rubio L, Fernandez-Saez J.
Source: JOURNAL OF SOUND AND VIBRATION Volume: 290 Issue: 3-5 Pages: 640-653 Published: MAR 7 2006.

2005

Title: Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel

Author(s): Rusinek A, Zaera R, Klepaczko JR, et al.
Source: ACTA MATERIALIA Volume: 53 Issue: 20 Pages: 5387-5400 Published: DEC 2005.

Title: The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study

Author(s): Lopez-Puente J, Arias A, Zaera R, et al.
Source: INTERNATIONAL JOURNAL OF IMPACT ENGINEERING Volume: 32 Issue: 1-4 Pages: 321-336 Published: DEC 2005.

Title: Compression after impact of thin composite laminates

Author(s): Sanchez-Saez S, Barbero E, Zaera R, Navarro C.
Source: COMPOSITES SCIENCE AND TECHNOLOGY Volume: 65 Issue: 13 Pages: 1911-1919 Published: OCT 2005.

Title: Measurements and Finite Element Simulations of Residual Stresses developed Si3N4/Ni Diffusion Bonds

Autores: M. Vila, C. Prieto, P. Miranzo, M.I. Osendi, J.M. del Río Campos and J. L. Pérez-Castellanos.
Source: Journal of American Ceramic Society, Vol.: 88 Pág.: 2515-2520, Year: 2005.

Title: Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure bar

Author(s): Rio TG, Barbero E, Zaera R, et al.
Source: COMPOSITES SCIENCE AND TECHNOLOGY Volume: 65 Issue: 1 Pages: 61-71 Published: JAN 2005.

Title: Damage in CFRPs due to low velocity impact at low temperature

Author(s): Gómez-del Río T., Zaera R., Barbero E., Navarro C.
Source: COMPOSITES PART B: ENGINEERING Volume: 36 Pages: 41-50, Published: 2005.

2004

Title: Manufacturing and compressive behavior of a polymeric material loaded with ceramic particles

Author(s): Arias A, Zaera R, Lopez-Puente J, Navarro, C.
Source: BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO Volume: 43 Issue: 2 Pages: 401-405. Published: MAR-APR 2004.

2003

Title: Effect of the strain rate and temperature on the mechanical behaviour of a Mg-5%Zn alloy reinforced with SiC particles

Author(s): Essa YS, Perez-Castellanos JL.
Source: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Volume: 143 Special Issue: Sp. Iss. SI Pages: 856-859 Published: DEC 20 2003.

Title: Determination of dynamic fracture-initiation toughness using three-point bending tests in a modified Hopkinson pressure bar

Author(s): Rubio L, Fernadez-Saez J, Navarro C.
Source: EXPERIMENTAL MECHANICS Volume: 43 Issue: 4 Pages: 379-386 Published: DEC 2003.

Title: Experimental study of the strain rate and temperature effects on the mechanical behavior of a magnesium-ilicon carbide composite

Author(s): Essa YE, Fernandez-Saez J, Perez-Castellanos JL.
Source: JOURNAL OF TESTING AND EVALUATION Volume: 31 Issue: 6 Pages: 449-457 Published: NOV 2003.

Title: Numerical simulation of dynamic TPB fracture test in a modified Hopkinson bar

Author(s): Loya J, Fernandez-Saez J, Navarro C.
Source: JOURNAL DE PHYSIQUE IV Volume: 110 Pages: 305-310 Published: SEP 2003.

Title: Numerical analysis of interruption process of dynamic tensile tests using a Hopkinson bar

Author(s): Lezcano RG, Essa YE, Perez-Castellanos JL.
Source: JOURNAL DE PHYSIQUE IV Volume: 110 Pages: 565-570 Published: SEP 2003.

Title: An engineering model on penetration of eroding rods into ceramic/polymer composite

Author(s): Zaera R, Arias A, Navarro C.
Source: JOURNAL DE PHYSIQUE IV Volume: 110 Pages: 609-614 Published: SEP 2003.

Title: High energy impact on woven laminates

Author(s): Lopez-Puente J, Zaera R, Navarro C.
Source: JOURNAL DE PHYSIQUE IV Volume: 110 Pages: 639-644 Published: SEP 2003.

Title: Prediction of the effect of temperature on impact damage in carbon/epoxy laminates

Author(s): del Rio TG, Zaera R, Navarro C.
Source: JOURNAL DE PHYSIQUE IV Volume: 110 Pages: 699-704 Published: SEP 2003.

Title: Some aspects of damage and failure mechanisms at high strain-rate and elevated temperatures of particulate magnesium matrix composites

Author(s): Essa YES, Fernandez-Saez J, Perez-Castellanos JL.
Source: COMPOSITES PART B-ENGINEERING Volume: 34 Issue: 6 Pages: 551-560 Published: 2003.

Title: Numerical modeling of the impact behavior of new particulate-loaded composite materials

Author(s): Arias A, Zaera R, Lopez-Puente J, et al.
Source: COMPOSITE STRUCTURES Volume: 61 Issue: 1-2 Pages: 151-159 Published: JUL-AUG 2003